ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS

ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953, 08168759420

WE WILL THEN SEND THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE FOR FREE

NOTE ALSO:

WE CAN ALSO DEVELOP THE FULL PROJECT WORK

CALL: 08068231953, 08168759420

ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS

Design and implementation of an android based automatic sector antenna positioning using atmega328p. (case study: namuyenje site in mokono)
Comparative analysis of practical skills acquisition in electrical/electronic engineering training program in accra and kumasi polytechnics in ghana.
Mixed h_2/h_∞ and robust predictive to control wheeled mobile robots with time delay
Buildings maintenance cost
Impact of electronic payment system in the nigerian financial institution (a case study of first bank nigeria plc)
Design and construction of 2kva inverter
Design of an electronic siren circuit
Design, development and testing of a liquefied petroleum gas powered tomato dryer with water energy stotage
Nitrogen doping effect on tin-selenium thin films for phase change memory applications
Contingency and security analysis for power system network . Case study _ nec grid
Automation of waste segregation via sensors by using plc
An assessment of embedded power generation in nigeria
Greenhouse wireless monitoring and control system based on sensor network
A comparison between proportional-integral-derivative and fuzzy controllers for water tank
Reliability centered maintenance (rcm) for asset management in electric power distribution system’
Reliability centered maintenance (rcm) for asset management in electric power distribution system
Design and construction of an automated street lighting system
Reliability evaluation of secondary distribution system in nigeria: a case study of ayetoro 1 substation, aguda, lagos state
Overcoming barriers to new learning technologies in a university setting: the case of covenant university
Application of common management information protocol (cmip) in atm network bandwidth allocation system
A co-ordination study of protection system for mala oil fields in block 5a
An intelligent load shedding system application in sudan national grid
Evaluation and improvement of power quality on distribution network: a case study of covenant university, ota
A new voltage stability index for predicting voltage collapse in electrical power system networks
Optimizing of dc motor speed using pid controller and grey prediction algorithm
Design and implementation of printed circuit board computer numerical control machine with path planning algorithm
Assessment and upgrading of scada system for petroleum pipelines
Maximum power point tracker of wind energy generation systems
Performance evaluation of ant colony optimization for routing in wireless sensor networks
The optimization of generating plants in a microgrid: the covenant university electric power network experience
Reliability evaluation of secondary distribution system in nigeria: a case study of ayetoro 1 substation, aguda, lagos state
The electrical engineer and the community a clarion call for sensitivity and long term investment
Derivation of the bandwidth resource allocation in an atm-based network
Short term electrical load forecasting using fuzzy logic
Battery charging control for wind energy generation system
Load frequency control in multi machine systems using pid controller
Performance assessment of thyristor controlled series compensator (tcsc) in sudanese national grid
Performance compration of equalization techniques in downlink long term evolution
Development of plc program and monitoring system for robotic arm
Globalization, energy, education and poverty alleviation: prospects & challenges for developing nations
Reliability centered maintenance (rcm) for asset management in electric power distribution system
Dual axis sun tracking system using a microcontroller and a stepper motor
Development of nonlinear control schemes for electric power system stabilization
Nero-fuzzy controller design for permanent magnet dc motor
Positioning the electric power sector for electricity sufficiency in nigeria to meet up with vision 2020.
An intrusion detection system using artificial neural network based on intrusion behavior
Positioning the electric power sector for electricity sufficiency in nigeria to meet up with vision 2020..
Positioning the electric power sector for electricity sufficiency in nigeria to meet up with vision 2020.
Boiler control design using fuzzy logic
Wireless electrical power transfer for charging low power appliances
Nigeria electricity industry: issues, challenges and solutions
A fault detection and protection scheme for a 200 mva transformer using fuzzy logic
Contingency analysis in presence of svc controller of sudan national grid for electricity
Cadmium chloride thin films: hydration-dehydration
Gsm based communication-sensor (commsense) system
The relevance of load following capability of nuclear power plant for the south african grid
An electrical power system for cubesats
Active object recognition for 2d and 3d applications
Investigation into the use of the microsoft kinect and the hough transform for mobile robotics
A 3-phase z-source inverter driven by a novel hybrid switching algorithm
Ultrasonic spectroscopy of liquid filled piezoelectric tube
Multivariable control of a nonlinear process output prioritisation by error redistribution
Fractal image compression and the self-affinity assumption: a stochastic signal modelling perspective
Novel low cost synchronisation network for spread spectrulyi systelvis
Damping of electromechanical oscillations using power system stabilizers
3-phase gate-turn off thyristor inverter
Electron beam decomposition of cdci2
A current source inverter-fed constant air gap flux controlled squirrel cage induction motor drive.
Natural variable modeling and performance of interior permanent magnet motor with concentrated and distributed windings
A fault detection and protection scheme for a 200 mva transformer using fuzzy logic
A modified linear contribution factor model for improvement of reliability indices of electrical distribution systems
Sliding mode direct torque control of three phase induction machine applicable in electric vehicles
Effects of selected roofing materials on air navigation signal propagation
Development of countermeasures against some internet security threats
Identifying permeability controls by use of gravity method in menengai geothermal field, kenya
Load optimization by steam and blade washing in a flash type power plant-a case study of olkaria ii geothermal power plant
Improved energy efficiency using facts-device technique: a case study of ogui-enugu power distribution network.
High power loss reduction in enugu electrical distribution systems using heuristic technique for capacitor placement.
Performance characteristics of a transfer field machine operating in the asynchronous mode
Automated energy meter reading by using radio frequency technology
Modeling h2s dispersion from proposed menengai geothermal powerplant
A case study of three dimensional inversions of electrical resistivity to image geothermal system in korosi geothermal prospect-kenya
Evaluation of potentials for renewable energy in the power system in sudan
Dynamic loss of load performance of an autonomous self-excited induction generator (seig)
Performance evaluation of channel estimation and detection algorithms for 5g massive mimo system
Some methodologies for facts controllers
Construction and test of a delta modulated buck type 3 phase converter
Design of digital filters using incremental changes in processing
Design of adaptive control schemes for an industrial robot arm
Correlation of load-point reliability indices with power system fault levels
Dynamic modelling and implementation of split-phase induction machine
Synthesis of a hysteresis motor
The role of technicians and craftsmen in a developing country
Investigation and simulation of a micro hydro, solar and biomas hybrid energy system for off-grid locations in nigeria
Efficient spectrum-handoff schemes for cognitive radio networks
Post graduate professional experience in electronic and electrical engineering
Evaluating the performance of the unified power flow controller (upfc) on fault current limitation in the nigerian 330kv power network
Sliding mode direct torque control of three phase induction machine applicable in electric vehicles
Modeling modelingand parameter extraction of a and parameter extraction of a 214 mva turbo- 214 mva turbo-generator driven by dc generator driven by dc motors during off- motors during off-li
A hybrid modulation scheme for cascaded h-bridge inverter cells
Dynamic analysis of induction machine connected to infinite bus-bar
A generalized solution to the thin-wire elliptical-cylindrical helical-beam antenna problem.work
Short circuit modelling and parameter extraction of a turbo generator
Short circuit modelling and parameter extraction of a turbo generator
E beam induced decomposition of inorganic solids
Electric vehicle charging infrastructure with three-way automatic switch
Privacy-by-design for internet of things(iot): implementing user autonomous options in a smart home scenario
A low cost anti-theft tracking system for electric vehicles
Automatic three phase changer
Store management system to jit
Optimal location and sizing of distributed generation in distribution network using adaptive neuro-fuzzy logic technique
Impact of weather variables on electricity power demand forecast using fuzzy logic technique
Assessing the benefits and challenges of distributed generation in nigeria power distribution network
Speed control of marine diesel engine self-tuning based on fuzzy pid control and genetic algorithm pid
Square wave to sinounsidal wave form
Microstructurally engineered p-layers for obtaining high open-circuit voltages in a-si:h n-i-p solar cells
Maximization of the open circuit voltage for a-si:h n-i-p solar cells by incorporation of protocrystalline si:h p-type layers
Correlation of light-induced changes in a-si:h films with characteristics of corresponding solar cells
Photovoltaics — a path to sustainable futures
Absence of carrier recombination associated with the defect pool model in a-si:h i-layers: evidence from current-voltage characteristics on p-i-n and n-i-p solar cells
Light induced defect states in hydrogenated amorphous silicon centered around 1.05 and 1.2ev from the conduction band edge
Numerical simulation of the direct application of compound parabolic concentrators to a single effect basin solar still
3d-mapping optimization of embodied energy of transportation
Reducing greenhouse gas emissions by inducing energy conservation and distributed generation from elimination of electric utility customer charges
Increasing pv velocity by reinvesting the nuclear energy insurance subsidy into large scale solar photovoltaic production
Expanded microchannel heat exchanger: design, fabrication and preliminary experimental test
Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems
Effects of spectral albedo on solar photovoltaic devices
Simulations of greenhouse gas emission reductions from low-cost hybrid solar photovoltaic and cogeneration systems for new communities
Mobile open-source solar-powered 3-d printers for distributed manufacturing in off-grid communities
Performance of u.s. hybrid distributed energy systems: solar photovoltaic, battery and combined heat and power
Double amorphous silicon-carbide p-layer structures producing highly stabilized pin-type protocrystalline silicon multilayer solar cells
Light-induced defect states in hydrogenated amorphous silicon centered around 1.0 and 1.2 ev from the conduction band edge
Photovoltaic system performance enhancement with non-tracking planar concentrators: experimental results and bi-directional reflectance function (bdrf) based modelling
Impact of snow and ground interference on photovoltaic electric system performance
Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems
Emerging economic viability of grid defection in a northern climate using solar hybrid systems
Aquavoltaics: synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
Belt-driven open source circuit mill using low-cost 3-d printer components
Coal with carbon capture and sequestration is not as land use efficient as solar photovoltaic technology for climate neutral electricity production
Open source low-cost power monitoring system
Design and construction of 36w automatic solar street light using solar panel, charge controller, led and with battery
Modeling of core loss in induction machine